 JandyColors Brochure
JandyColors Light Installation and Operation Manual
JandyColors Light Specifiactions
JandyColors Pool Light Replacement Parts
JandyColors Spa Light Replacement Parts | Application:
The most advanced, digitally automated, color changing light for pools and spas. JandyColors are ETL approved to fit into existing niches.
Features:- JandyColors saturates any pool or spa with ten vibrant colors; Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Red, Magenta, Garnet Red, Violet, Alpine White or Color Splash
- Microprocessor blended colors for smooth transitions and no moving parts
- Four times longer bulb life than other brands, up to 16,000 hours
- Eight quartz halogen bulbs per light, two bulbs on at all times
- Available in 120 volt and 12 volt versions
- Controlled by a single switch or seamlessly interfaces with Jandy controls
- ETL listed to be installed in other manufacturers niches
Approved Large Pool Type Niche Model Numbers:
Pentair: 78210XXX, 7822XXXX, 78232XXX, 79206700, 79208900
Hayward DuraNiche: SP0600U
Sta-Rite: 05161-XXXX, 05163-XXXX
Approved Small Spa Type Niche Model Numbers:
Pentair: 78241XXX, 78242XXX, 78243XXX, 78244XXX, 79206600
Hayward DuraNiche: SP0601U
Sta-Rite: 05166-XXXX, 05167-XXXX
Notes:
1. All 120-volt pool and spa lights must be connected to a branch circuit protected by a ground circuit (GFCI).
2. A separate 12-volte AC Transformer is required on all 12-volt Models. For a Jandy Pool Light use a 300-watt multi tap 12-volt system. For the Jandy Spa Light, a 100-watt 12-volt systems is acceptable.
3. If installing 12-volt lights, it is not recommended to use cord lengths greater than 50 feet. A significant voltage drop will occur that dramatically reduces the light output. Refer to the installation manual for wire voltage losses and potential effect.
4. When ordering, allow 4 ft. of extra cable to coil around the canister for serviceability.
|
